Timeshift Function - TechniSat DIGIT ISIO STC Quick Start Manual

> Select the line with the desired action.
If you have selected End recording the query as to what should happen to the
recording, as described under Point 10.1.1.2 in your operating manual, appears.
If you have selected the programme title or one of the specified times, the receiver
now records the whole of the current programme, or records it up to the selected time,
and then switches to Standby. The screen switches off immediately after the selection
is made.
Option 2
Pressing the Record button causes a window to open containing all available
>
functions.
You can, for example, select +1 hour whereby the receiver will continue to record the
>
channel and then automatically stop recording.
13.2 Timer recordings
You can use the DVR timer to record programmes to an attached recording medium while
you are out. Your receiver also has a channel-switching timer. In terms of their programming,
these timer types differ only in names (see Point 9.15 in your operating manual). You can
programme the timers manually as described in this section, or use the EPG function.
Ensure that the receiver has acquired the correct time. During use, this is displayed in
the Infobox and in standby mode in the panel display (if activated). If this is not the
case, switch the receiver to a major channel such as ZDF for approx. 30 seconds, to
acquire the time.

13.3 Timeshift function

The Timeshift function allows you to record and play back at the same time. This enables
"timeshifted" viewing.
Hence, you can start watching the beginning of a recording and skip through any sections
already recorded (e.g. advertising slots). The live broadcast of the programme continues
45