TechniSat DIGIT ISIO STC Quick Start Manual page 50

PIN input
Here you can set a PIN for the respective CI slot. This pin is required to support DVR
recordings with parental control restrictions.
This setting is only available if this function is supported by your CI / CI+ module.
Manually initialising the CI / CI+ module
By pressing the green function button, CI Reset you can manually initialise the
>
inserted CI / CI+ module.
16 ISI mode
The numerous functions and added value make watching television with TechniSat a
wonderful and complex experience, with a wide range of possibilities. ISI mode cuts down
the large number of options and is therefore ideal for children or older people who do not
feel comfortable with the host of configuration options when operating the device. If the
mode is activated it is no longer possible to accidentally make changes with the remote
control. At the same time, ISI mode displays simplified channel information in large text on
the screen for people with visual impairment and, if desired, offers a clearly legible digital
time display.
> Activate ISI mode as described under Point 8.8.1.6 in your operating manual.
With ISI mode active, the following functions are now disabled:
- Automatic updates
- Films / DVR / Music / Images
- Internet / HbbTV
- watchmi
- Mobile Apps
- UPnP Renderer
- Direct WLAN - TechniCast
- EPG / Timer
Access to the various menus is also blocked, although you still have access to the
menu to disable ISI mode.
ISI mode can also be used with the IsiZapper remote control, which is optimised for ISI
mode, see also Point 3.1 (Optional IsiZapper remote control).
16.1 Switching the device on / off (ISI mode)
When the device is on standby, you can switch it on by pressing the On / Standby
>
button on the remote control / device.
> When operating normally you can switch the device to standby mode by pressing the
On / Standby button.
50