Software Updates - TechniSat DIGIT ISIO STC Quick Start Manual

In this search, all selected satellites in the antenna configuration are automatically
scanned for channels. This procedure may take several minutes. Please note all
subsequent messages displayed on screen.
After a program list update or a satellite search, all additional reception types are then
searched for. This procedure may take several minutes. Please note all subsequent
messages displayed on screen.
If you skip the channel search / channel list update, the default channel list will be
loaded.
Regional programmes
Some broadcasters transmit channels with varying regional content. On this page you can
now specify which of these regional channels you prefer. The selected regional channel is
automatically set by switching to the relevant broadcaster.
Use the arrow keys to highlight the broadcaster that you wish to set as your
>
preferred regional channel.
Press the OK button to open a window with the regional programming available for
>
this broadcaster.
Use the up / down arrow keys to select your preferred regional channel.
>
Press the OK button to close the window again.
>
To accept the selected regional programming, use the arrow keys to highlight the
>
Accept field.
Press the OK button to move on to the next step of the installation.
>

Software updates

The digital receiver will now check whether a new version of the software is available for the
receiver.
27