TechniSat DIGIT ISIO STC Quick Start Manual page 34

View
The View option allows you to change the channel display order. The available options are
Sort by channel number (sorting by channel slot number) or Sort by name
(alphabetical sorting).
Filter
By setting one or more filters, you can limit the display to certain channels that fulfil the
desired criteria.
Highlight the Filter option and press the OK button.
>
Now select the desired filter group and press the OK button once more.
>
> Now select the desired filter option from the list that appears and confirm the selection
using the OK button.
The channel list now only shows channels that match the desired criteria.
To filter this list further, repeat the steps described above and thus apply additional
filters.
To remove all filters
Open the Options menu using the OPT button.
>
Select the Filter option and press the OK button.
>
Now select [Reset all filters] and press the OK button.
>
The full channels list is now displayed again.
7.4.5 Calling up blocked channels
If a programme is selected that is blocked by the parental control function, the message
Device PIN will be displayed on the screen.
Use the numeric keys to enter your PIN code.
>
The channel you want will be displayed.
34