TechniSat DIGIT ISIO STC Quick Start Manual page 33

If you wish to enter a number consisting of only one, two or three digits, you can speed up
the entry procedure by keeping the key depressed a little longer on the last digit.
7.4.3 Using the Navigator (channel list)
Press the OK button.
>
The channel list navigator will appear. In TV mode only TV channels are shown, and in radio
mode only radio channels are shown.
The channel currently selected is highlighted.
You can view additional data about the current programme by pressing the INFO
>
button.
7.4.3.1 Selecting a channel
You can now use the up / down arrow keys to move the page up or down, and
>
the numeric pad keys to highlight the desired channel.
Press the OK button to select the highlighted channel.
>
7.4.3.2 Selecting a list
To make it easier for you to find channels, your device provides various channel lists. You
can select one of your favourites lists (see Point 13.1 in your operating manual)
and sort or filter the channels according to various criteria.
Press the OK button.
>
The active channel list will appear.
Now use the Options selection function to open the desired channel list
>
33