TechniSat DIGIT ISIO STC Quick Start Manual page 47

14.1 Calling up the DVR Navigator / Starting DVR playback
The DVR Navigator can be called up in the following ways. Depending on whether you are
in TV or radio mode, a list appears with all the TV or radio recordings stored on a connected
USB storage medium, an inserted SD / MMC card or an available network drive.
When doing so pay careful attention to the information and settings for global and
user-dependent parental control in Point 8.3.5 of the instruction manual.
Using the Info button, you can display the programme information and hide it again by
re-pressing the button.
You can start to play back a recording by highlighting it and confirming with OK.
>
14.1.1 When in TV mode
In TV mode press the Stop / DVR button to switch directly to the DVR Navigator.
>
or
Open the channel list navigator by pressing the OK button and switch to the DVR
>
navigator by pressing the Stop / DVR button.
or
In the Function selection select the Films / DVR item.
>
Now call up the My Recordings folder on your connected recording medium.
>
14.1.2 From playback of a running / existing DVR recording
Press the OK button to open the DVR navigator.
>
or
In the Function selection select the Films / DVR item.
>
Now call up the My Recordings folder on your connected recording medium.
>
14.2 Pause / Freeze frame
To pause playback of a recording (freeze frame), press the Pause / Play button
>
during playback.
47