Switching Between Tv / Radio - TechniSat DIGIT ISIO STC Quick Start Manual

16.2 Channel selection (ISI mode)
16.2.1 Using the channel up / down buttons
Use the up / down arrow keys on the receiver to select a channel, or use the
>
Channel + / - buttons on the remote control to scroll up or down the channel
settings.
16.2.2 Using the numeric pad keys
Use the numeric keypad keys to enter the number of the channel you want.
>
For example:
1
1, then 4
2, then 3, then 4
1, then 5, then 6
When entering channel numbers with multiple digits, you have approx. three seconds after
pressing a key to complete the entry.
If you wish to enter a number consisting of only one, two or three digits, you can speed up
the entry procedure by keeping the key depressed a little longer on the last digit.
16.2.3 Using the Navigator (channel list)
Press the OK button.
>
The channel list navigator will appear. In TV mode only TV channels are shown, and in radio
mode only radio channels are shown.
The channel currently selected is highlighted.
You can now use the up / down arrow keys, to move the page up / down and
>
the numeric pad keys to highlight the desired channel.
Press the OK button to select the highlighted channel.
>

16.3 Switching between TV / radio

Using the 0 button, call up the NAV menu.
>
for channel slot 1
for channel slot 14
for channel slot 234
then 7
for channel slot 1567
51