Network Configuration - TechniSat DIGIT ISIO STC Quick Start Manual

Furthermore, in this step a channel spectrum with the signal levels of the channels is
displayed. Using this spectrum you can align your DVB-T antenna for optimal reception.
If the DVB-T source has been disabled as described in the "Selecting the
reception signal" step, the next available installation wizard screen appears in
place of this one.
Use the up / down arrow keys to highlight the antenna supply field and
>
confirm by pressing the OK button.
Switch the antenna supply on or off by highlighting the corresponding entry with the
>
up / down arrow keys and confirm using the OK button.
To get to the next step of the installation, use the arrow keys to highlight the
>
Accept field and confirm with the OK button.

Network configuration

In this step, the TV automatically checks the network configuration.
If you do not want to run the network configuration check, press the Info button.
>
If you want to check or change the network settings, press the Options button.
>
25