TechniSat DIGIT ISIO STC Quick Start Manual page 30

Accept:
>
Next, the up-to-date data for the watchmi channels is loaded.
After updating, you have the option of selecting channels and adding them to your TV list.
Using the up / down arrow keys you can scroll the selection bar through the
>
channels and then select the highlighted channels using the OK button.
The selected channels appear with a check mark next to them.
Highlight a selected channel once again and press the OK button. This channel
>
will be removed again.
A brief description of the highlighted channel appears on the right hand side.
Using the yellow function button you can blanket select all channels.
>
To finally accept your selections, press the green function button.
>
These settings can also be changed at any time. The options can be found under Point 12.
you here by accept the Ts&Cs. the data is then updated and in the
next step you have the option of selecting your desired channels.
30