TechniSat DIGIT ISIO STC Quick Start Manual page 28

If a new software version is available, you can carry out an automatic software update.
> If you do not want to wait for a search for new software or a software download, you
can skip this step if you wish by pressing the Info button.
If the search for new software or updates is skipped, your device will run another
check at the time set in accordance with Point 18.5.2 in your operating manual and
automatically download the software, as long as this setting is left active and the
device is in standby mode at that time.
If there is no new TV software available, you can press the OK button to go to the
>
next step in the installation wizard.
> If, on the other hand, new TV software is found, the automatic software update can be
started by pressing the OK button.
The message "Updating software. Please wait" is displayed on the screen
along with a progress bar showing the progress of the download.
Two additional progress bars then appear showing the progress of the individual
updating steps. AutoInstall will then resume.
ISIO Internet list updates
The receiver has a pre-programmed ISIO list with web links. These can be automatically
updated.
28