Ending Playback - TechniSat DIGIT ISIO S Quick Start Manual

9.3.6 Jump to tags
During playback you have the option of navigating directly to locations in the recording
where you have set tags.
Using the options selection under the Tag menu item, select the tag to skip to the
>
location you want in the recording.

9.3.7 Ending playback

Press the Stop button to stop playback. Playback is ended and the receiver reverts
>
to normal mode. In doing so the receiver "notices" the place in the recording where
playback ended. If you start playing this recording again, it will automatically resume at
the point where you previously left off.
Then select OK in the query that appears to confirm or press Abort to cancel the
>
process.
36