Example #3: Show Logging Traplogs; Example #4: Show Logging Hosts - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #3: show logging traplogs

(Netgear Switch Routing)
<cr> Press Enter to execute the command.
(Netgear Switch Routing)
Number of Traps Since Last Reset............
Trap Log Capacity............................
Number of Traps Since Log Last Viewed.......
Log System Up Time
--- --------------
0 0 days 00:00:46
1 0 days 00:01:01
2 0 days 00:21:33
3 0 days 18:33:31
4 0 days 19:27:05
5 0 days 19:29:57

Example #4: show logging hosts

(Netgear Switch Routing) #show logging hosts ?
<cr>
(Netgear Switch Routing) #show logging hosts
Index IP Address
----- -----------------
1 192.168.21.253
19-4
Trap
----------------------------------------------
Link Up: Unit: 3 Slot: 0 Port: 2
Cold Start: Unit: 0
Failed User Login: Unit: 1 User ID: admin
Failed User Login: Unit: 1 User ID: \
Multiple Users: Unit: 0
Multiple Users: Unit: 0
Press Enter to execute the command.
Severity Port
---------- ----
critical 514
v1.0, May 2008
#show logging traplogs
#show logging traplogs
6
256
6
Slot: 3 Port: 1
Slot: 3 Port: 1
Status
-------------
Active
?
Syslog