NETGEAR 7000 Series Administration Manual page 113
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Administration manual (148 pages)
Table of Contents
Advertisement
13. Apply ACL 103 to port 24 and port 48:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A
screen similar to the following displays.
Figure 9-38
b. Under Binding Configuration, make the following selection and enter the following
information:
•
Select 103 from the ACL ID pulldown menu.
•
In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display. Configure the following ports:
•
Click on the gray box under port 24. A flag appears in the box.
•
Click on the gray box under port 48. A flag appears in the box.
d. Click Apply to save the settings.
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
v1.0, May 2008
9-37
Advertisement
Table of Contents
