NETGEAR 7000 Series Administration Manual page 104

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
e. Click Apply to save VLAN 48.
3. Create VLAN 38 with IP address 10.100.5.34:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
Figure 9-25
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 38.
• In the IP Address field, enter 10.100.5.34.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 38 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 38.
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to
the following displays.
9-28
v1.0, May 2008
Access Control Lists (ACLs)