NETGEAR 7000 Series Administration Manual page 112

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
12. Apply ACL 101 to port 48:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A
screen similar to the following displays.
Figure 9-37
b. Under Binding Configuration, make the following selection and enter the following
information:
• Select 101 from the ACL ID pulldown menu.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 48. A flag appears in the box.
e. Click Apply to save the settings.
9-36
v1.0, May 2008
Access Control Lists (ACLs)