NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Add two static routes so that the switch forwards the packets with destinations
192.168.100.0/24 and 192.168.30.0/24 to the correct next hops.
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#ip route 192.168.100.0 255.255.255.0 192.168.200.1
(Netgear Switch) (Config)#ip route 192.168.30.0 255.255.255.0 192.168.200.1
Web Interface Procedure
To use the Web interface to configure the GSM7248R, proceed as follows:
1. Create VLAN 30 with IP address 192.168.30.1/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
Figure 9-3
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 30.
•
In the IP Address field, enter 192.168.30.1.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 35 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 30.
9-8
v1.0, May 2008
Access Control Lists (ACLs)