Starting The Web Interface; Web Interface Layout - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
2. Enable Web mode:
a. At the CLI prompt, enter the show network command.
b. Set Web Mode to Enabled.

Starting the Web Interface

Follow these steps to start the switch Web interface:
1. Enter the IP address of the switch in the Web browser address field.
2. When the Login panel is displayed click Login.
3. .Enter the appropriate User Name and Password. The User Name and associated Password are
the same as those used for the terminal interface. Click on the Login button.
4. The System Description Menu displays, with the navigation tree appearing to the left of the
screen.
5. Make a selection by clicking on the appropriate item in the navigation tree.

Web Interface Layout

As of software release 7.2, the Web interface has a new look. The new Web interface is called the
Prosafe Control Center (PCC).
When you use the switch's IP address to log into the switch, the following screen displays:
4-2
v1.0, May 2008
Using the Web Interface