NETGEAR 7000 Series Administration Manual page 97
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
3. Create VLAN 200 with IP address 192.168.200.2/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
Figure 9-19
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 200.
•
In the IP Address field, enter 192.168.200.2.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 200.
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
v1.0, May 2008
9-21
Advertisement
Table of Contents
