Cli Examples; Example #1: Show Ip Interface; Example #2: Ip Proxy-Arp - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

CLI Examples

The following are examples of the commands used in the proxy ARP feature.

Example #1: show ip interface

(Netgear Switch) #show ip interface ?
<slot/port>
brief
(Netgear Switch) #show ip interface 0/24
Routing Mode................................... Disable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Disable
Active State................................... Inactive
Link Speed Data Rate........................... Inactive
MAC Address.................................... 08:00:17:05:05:02
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500

Example #2: ip proxy-arp

(Netgear Switch) (Interface 0/24)#ip proxy-arp ?
<cr>
(Netgear Switch) (Interface 0/24)#ip proxy-arp
7-22
Enter an interface in slot/port format.
Display summary information about IP configuration
settings for all ports.
Press Enter to execute the command.
v1.0, May 2008
IP Routing Services