Example #2: Show Igmpsnooping; Example #3: Show Mac-Address-Table Igmpsnooping - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #2: show igmpsnooping

(Netgear Switch)
<cr> Press Enter to execute the command.
<slot/port> Enter interface in slot/port format.
mrouter Display IGMP Snooping Multicast Router information.
<1-4093> Display IGMP Snooping valid VLAN ID information.
(Netgear Switch)
Admin Mode...............................
Multicast Control Frame Count............
Interfaces Enabled for IGMP Snooping.....
Vlans enabled for IGMP snooping..........

Example #3: show mac-address-table igmpsnooping

(Netgear Switch) #show mac-address-table igmpsnooping ?
<cr>
(Netgear Switch) #show mac-address-table igmpsnooping
-----------------------
00:01:01:00:5E:00:01:16
00:01:01:00:5E:00:01:18
00:01:01:00:5E:37:96:D0
00:01:01:00:5E:7F:FF:FA
00:01:01:00:5E:7F:FF:FE
12-2
#show igmpsnooping?
#show igmpsnooping
Press Enter to execute the command.
Type Description
------- --------------
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
Dynamic Network Assist
v1.0, May 2008
Enable
0
1/0/10
20
Interfaces
-----------
Fwd: 1/0/47
Fwd: 1/0/47
Fwd: 1/0/47
Fwd: 1/0/47
Fwd: 1/0/47
IGMP Snooping