Example #3 Configure Mac Access-Group - NETGEAR 7000 Series Administration Manual
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Administration manual (118 pages)
Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Example #3 Configure mac access-group
(Netgear Switch) (Config)#interface 1/0/5
(Netgear Switch) (Interface 1/0/5)#mac ?
access-group
Attach MAC Access List to Interface.
(Netgear Switch) (Interface 1/0/5)#mac access-group ?
<name>
Enter name of MAC Access Control List.
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 ?
in
Enter the direction <in>.
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 in ?
<cr>
<1-4294967295>
(Netgear Switch) (Interface 1/0/5)#mac access-group b1 in
9-40
Press Enter to execute the command.
Enter the sequence number (greater than 0) to rank precedence
for this interface and direction. A lower sequence number has
higher precedence.
v1.0, May 2008
Access Control Lists (ACLs)
Advertisement
Table of Contents
