Cli Examples - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
• Intra-area
• Inter-area
• External type 1: the route is external to the AS
• External Type 2: the route was learned from other protocols such as RIP

CLI Examples

The examples in this section show you how to configure a 7000 Series Managed Switch first as an
inter-area router and then as a border router. They show two areas, each with its own border router
connected to one inter-area router.
The first diagram shows a network segment with an inter-area router connecting areas 0.0.0.2 and
0.0.0.3. The example script shows the commands used to configure a 7000 Series Managed Switch
as the inter-area router in the diagram by enabling OSPF on port 1/0/2 in area 0.0.0.2 and port 1/0/
3 in area 0.0.0.3.
7-16
v1.0, May 2008
IP Routing Services