This section describes the Internet Group Management Protocol (IGMP) feature: IGMPv3 and
IGMP Snooping.
Overview
IGMP:
•
Uses Version 3 of IGMP
•
Includes snooping
•
Snooping can be enabled per VLAN
CLI Examples
The following are examples of the commands used in the IGMP Snooping feature.
Example #1: show igmpsnooping
(Netgear Switch)
<cr>
Press Enter to execute the command.
<slot/port>
Enter interface in slot/port format.
mrouter
Display IGMP Snooping Multicast Router information.
<1-4093>
Display IGMP Snooping valid VLAN ID information.
(Netgear Switch)
Admin Mode...............................
Multicast Control Frame Count............
Interfaces Enabled for IGMP Snooping.....
Vlans enabled for IGMP snooping..........
#show igmpsnooping?
#show igmpsnooping
v1.0, March 2006
Chapter 10
IGMP Snooping
Enable
0
1/2/10
20
10-1