Advertisement
7-1 TASCAM MULTITRACK
CASSETTE
RECORDERS
Q Connections
First check to see that the machine you wmt to connect to
the rernotc is turned off, and that the deck's baud rate is
set to 9600.
Then connect the rcmotc EXT 2 (ACCESSORY 2)
connector to the deck's ACCESSORY 2 connector using
the optional PW-88AC2 cable.
0 Machine Selection
1, Press
MACHINE.
"Selecf'
will show in the LOCATE TIME window.
2. Press 6 on the keypad.
"E2" will light up in the MACHINE window.
Cl
Remote Functions Changed/Limited
REC FUNCTION
switches
1-8 (or 1-4 if the 64l is connected)
:
Only these switches
act as the REC FUNCTION switches.
7*1
When connecting the RC-848 to arty TASCAM machines* via the "Accessory 2" connector, it is necessary to use an
isolation cable. This isolation cable is made by TASCAM and it is model
number PW-66AC2.
'TASCAM machines with Accessory 2 port include MSR-24/24S, MSR-16/16S, TSR-E, 236/236S, 666, 644,
134/134B, CD-601, RC-701 and RC-601.
25
:
Mutes all inputs of the deck at once.
26
:
Unmutes all inputs of the deck at once.
46
:
When machine "E2" is selected, the TAPE TIME
display acts zu ZJ tape counter, and pressing switch 48
resets both the remote and deck's tape counvxs.
All other REC FUNCTION switches cannot operate.
TAPE
TIME display
This acts as a conventional mpe counter. You can press
the REC FUNCTION #48
key to reset the counter
to
00.00 to use any
point on the mpe as ZI starting point for
time reference.
When the tape rewinds past the 00.00 point, ZI "-" will
show in the H(our) window.
To locate the tape to the counter zero point, press 0. The
MEMORY NO, display will show 0. Then press LOC.
JOG/SHUlTLE switch
Puts machine E2
into Pause mode.
RHSL and
AUTO IN/OUT switches
Provide the same functions a.s when any DA-88 is under
remote control, but their LEDs flash throughout the
process; they don't glow solid.
Numeric
keys
When
STR or RCL is activated, only 1 and 2 on the
numeric keypad can operate to establish &vo memory
points or to recall them into the LOCATE TIME window.
To locate the tape to either memory point, press RCL,
then press 1 or 2 on the keypad. The memory point will
be recalled into the LOCATE TIME window, then press
LOC.
-
Advertisement
