Advertisement
CHAPTER 5 : SYNCHRONIZING MULTIPLE OA'S
5.
Access the Output Timing menu screen (Group I). It will look like this :
6. Press the + or-key
to change the "Analog" to "Digital."
Press all the 8 REC FUNCTION witches
(9-16 if machine 2 is selected, 17.24 if
machine 3 is selected, etc.). The associated LEDs will start flashing to show the
tracks arc in Record Ready mode.
Press CHASE. "CHASE" will show in the LOCAm
TIME window, then enter a
number to specify the target machine.
The number just entered
will start flashing
rapidly
in the LOCK
STATUS
window, showing the target machine is being located to the same time point as the
source machine. The number will flash slowly when that time point is reached.
When the LOCK STATUS indicator
stops flashing rapidly and starts flashing
slowly, hold REC and press PLAY on the remote. The source machine will start
playing, and the target machine will automatically
start recording.
IO. When dubbing is complete, press STOP.
To copy timecode
as well :
The SY-88 Sync Board must be installed into both the source and target machines.
For more information, see the section, USING THE RC-X48 WITH THE SY-XX.
Advertisement
