Advertisement
multiple
DA sync sys~?m L basic example of which is shown in Chapter
Make all connections with power OFF.
the DA-X&, assign them machine ID numbers ar this stage, while
they at-t? turned off
system. Be sure to tur" o" all the slaves BEFORE the mzuter.
If you we using the DA-3Ss, assign them machine ID numbers at this stage.
Assign a different ID number to each of the DAs.
other tapes in the DA.
tapes.
Select a slave DA with the MACHINE switch and the numeric keypad, then press
the remote REW to rewind the tape in the selected mxhine alI the wy to the
beginning.
Press the remote CHASE and the "CHASE" will show in the LOCATE TIME
window.
Enter the selected machine's ID number on the numeric keypad.
Access the Format menu screen (Group I), which will look like this
If you want to exit the format mode at this stage, press ESCAPE or MENU,
Press ENTER. The display wil1 read
You czm change the sampling rate in the next step,
CHAPTER 4 : OPERATIONS GIJIOE
WARNING
IMPORTANT
NOTES
Advertisement
