TASCAM web site (http://www.tascam.com). Features Trademarks Direct playback start of up to 100 takes (20 takes x 5 • TASCAM is a trademark of TEAC Corporation, registered • pages) in the U.S. and other countries. Instantaneous playback start using the flash start •...
To clean the unit, wipe it gently with a soft dry cloth. Do not wipe with chemical cleaning cloths, benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface. TASCAM RC-HS20PD...
Before connecting headphones, turn the LEVEL knob to This has the same function as the EXIT/CANCEL key the minimum volume. Failure to do so could cause sudden on the HS-8. loud noises to occur, which might damage your hearing or equipment. TASCAM RC-HS20PD...
The REMOTE connector is not an Ethernet (LAN) connector. • Never connect a cable that is connected to a network. Always turn the HS-8 unit power OFF before connecting • or disconnecting a cable. Connecting a cable while the power is ON could cause damage. TASCAM RC-HS20PD...
For details about play mode settings, see “GENERAL page” of “6 – Internal Settings and Operations” in the HS-8 Owner’s Manual. 2 Select the folder to play. See “Loading folders” of “5 – Projects” in the HS-8 Owner’s Manual. TASCAM RC-HS20PD...
If that take has been flash-loaded, it will start playing immediately (flash playback). If the take has not been flash-loaded, it will start ordinary playback. TASCAM RC-HS20PD...
Weight 1.4 kg/3.086 lb Operating temperature range 5–35ºC/41–95ºF Dimensional drawing Illustrations in this manual may differ in part from the actual product. • Specifications and the external appearance may be changed without notification to improve the product. • TASCAM RC-HS20PD...
Need help?
Do you have a question about the RC-HS20PD and is the answer not in the manual?
Questions and answers