Advertisement
CHAPTER 2 : ACCESSING THE MENU SCREENS
Display Select
The
TAPE TIME display will read one of two track times
(Elapsed and Remain), a.s selected here, or when the RC-
701 is used, options are expanded to include two disc
times (Total Elapsed and Total Remain).
0
Others
These menus are accessible when any of machines I-6 is
under control.
Function Reset
Allows
you to reset the following
pxameters
to theit
factory preset values at 0"ce
:
X-Fade Time (Group I), Machine Offset, Delay Time,
and Pitch Control (Group 2).
To do so, proceed as follows :
Press SHIFT + CLR (not CLEAR)
at the initial screen, the
display will change to look like this :
Then, press ENTER. Or if you change your mind, you can
press ESCAPE
;
you'll then go back to the initial screen.
Memory All Clear
From this menu you can clear all cw points and a relative
reference point in memos at once, as follows
:
Turn the SHUTTLE knob or press SHIFT + MENU at the
Function Reset menu above. The display will change to
look like this
:
Then, press ENTER, All memories 00 to 99 for the DA
under control (any of machines 1-6) is cleared.
Or, if you change your mind, press ESCAPE. You'll go
back to the initial screen.
If you turn the SHUTTLE knob or press SHIFT + MENU
(instead of pressing ENTER
or ESCAPE), you'll go back
to the Function Reset menu.
-
2.12
Advertisement
