Advertisement
CHAPTER4:
OPERATIONS GIJIOE
If you want to record audio from digital inputs, press the + or
key. The screen
will change to read "Digital." Pressing the key again will switch the screen back
to "Analog."
If you have selected
"Digital,"
the DA currently
under
remote
control
is
automatically
referenced
to the clock derived
from its WORD SYNC IN, as
confirmed by the WORD CLOCK indicator being lit on the remote.
Press
GROUP then MENU so the xrecn
reads
:
If "Vari" shows, press
ENTER to
select "Fix."
Press the
REC FUNCTION
switches
for the tracks
to be recorded
on. The
associated LEDs will start flashing to show that the tracks are in Record Ready
mode.
If you intend to record analog audio, adjust the output level controls of the source
machine
as high as possible,
without causing
overscale
reading
on the DA's
nleter.
Hold
FtEC and press PLAY to start
audio recording.
To terminate recording, press STOP.
IO. To insure against accidental erase, put the tracks into Safe mode by pressing their
REC FUNCTION
switches again, Alternatively, you can press ALL SAFE.
Il. Rewind the tape to the beginning of the recording just done.
Playback
12. Make sure that your monitor speaker system is correctly connected
to the DA,
then press
PLAY.
13.
To stop play (definitely or momentarily),
press
STOP,
Advertisement
