Removing The Cover And Bezel - IBM xSeries 342 2RX Maintenance Manual

Removing the cover and bezel

To remove the server top cover:
1. Review the information in "Before you begin" on page 42.
2. If you are planning to install or remove any part other than a hot-swap hard
44
Hardware Maintenance Manual: xSeries 342 Model 1RX, 2RX, 1TG, 2TG
disk drive, hot-swap power supply, or hot-swap fan, turn off the server and all
attached devices and disconnect all external cables and power cords.
v Statement 1
Cover-release latch
Side latch
Side latch
Bezel