Table of Contents
Advertisement
v A removed hot-swap drive is replaced within two minutes of removal.
v Cables for optional adapters are routed according to the instructions provided
v A failed fan is replaced within 48 hours.
Working inside a server with power on
Your server supports hot-plug, hot-add, and hot-swap devices and it is designed to
operate safely while turned on with the cover removed. Follow these guidelines
when you work inside a server that is turned on:
v Avoid loose-fitting clothing on your forearms. Button long-sleeved shirts before
v Do not allow your necktie to hang inside the server.
v Remove jewelry, such as bracelets, necklaces, and loose-fitting wrist watches.
v Remove items from your shirt pocket (such as pens or pencils) that could fall
v Take care to avoid dropping any metallic objects, such as paper clips, hair pins,
Handling static-sensitive devices
Static electricity, though harmless to you, can seriously damage server components
or options.
Note: When you are adding an internal option, do not open the static-protective
When you handle options and other server components, take these precautions to
avoid damage from static electricity:
v Limit your movement. Movement can cause static electricity to build up around
v Always handle components carefully. Handle adapters, the memory board, and
v Prevent others from touching components.
v When you are installing a new option, touch the static-protective package
v When possible, remove the option and install it directly into the server without
v Do not place the option on the server's covers or any metal surface.
with the adapters.
working inside the server; do not wear cuff links while you are working inside
the server.
into the server as you lean over it.
or screws, into the server.
package containing the option until you are instructed to do so.
you.
memory modules (DIMMs) by the edges. Never touch any exposed circuitry.
containing the option to a metal expansion-slot screw or other unpainted metal
surface on the server for at least two seconds. (This reduces static electricity
from the package and from your body.)
setting the option down. When this is not possible, place the static-protective
package that the option comes in on a smooth, level surface and place the option
on it.
43
Installing options
Advertisement
Table of Contents
