Fru Information (Service Only); Removing The Led Cover; Removing The Led Board - IBM xSeries 342 2RX Maintenance Manual

FRU information (service only)

Field Replacement Units (FRUs) for the xSeries 342 should be replaced by qualified
service personnel only.
Note: Before performing any removals, read "Safety information" on page 107 and

Removing the LED cover

Note: Before performing removal, read "Safety information" on page 107 and
To remove the LED cover, do the following:
1. Turn off server and disconnect all external cables and power cords.
2. Remove the cover. See "Removing the cover and bezel" on page 44.
3. From the back of the cover, release the four tabs 1 and gently pry away the

Removing the LED board

Note: Before performing removal, read "Safety information" on page 107 and
© Copyright IBM Corp. 2000, 2001
"Handling static-sensitive devices" on page 43.
"Handling static-sensitive devices" on page 43.
LED cover 2 .
"Handling static-sensitive devices" on page 43.
75