v Setup time wait menu
Select this choice to set the amount of time (in seconds) that the system will
pause during initialization for a Ctrl+S input.
– 2 seconds (Default)
– 3 seconds
– 5 seconds
– 8 seconds
v Legacy OS wake up support
Select this choice to enable or disable the operating system wake up support.
– Disabled (Default)
– Enabled
Note:
1. Use the default setting for the Advanced Configuration and Power
Interface (ACPI) aware operating systems, such as Windows 2000 or
Windows NT.
2. If your server is running a non-ACPI operating system, you must set the
selection to Enable to use the Wake on LAN support.
3. When using a non-ACPI operating system, do not send a wake up
packet to the server while it is turned on. If a wake up packet has been
sent while the server is on, you must turn off the server.
Using the SCSISelect utility program
Configuring the server
33