1. Manuals
  2. Brands
  3. IBM Manuals
  4. Server
  5. xSeries 345
  6. Option installation manual

IBM xSeries 345 Option Installation Manual

Type 8670
Hide thumbs Also See for xSeries 345:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
xSeries 345
Type 8670
Option Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for IBM xSeries 345

Summary of Contents for IBM xSeries 345

  • Page 1 345 Type 8670 Option Installation Guide...
  • Page 3 IBM xSeries 345 Type 8670 Option Installation Guide SC48-P971-90...
  • Page 4 Before using this information and the product it supports, be sure to read the general information in “Notices” on page 43. First Edition (July 2002) © Copyright International Business Machines Corporation 2002. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

  • Page 5: Table Of Contents

    ....1 Major components of the xSeries 345 Type 8670 server ..2 Component locations ..... . . 3 System-board option connectors .
  • Page 6 Power cords ......47 Index ......49 IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 7: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright IBM Corp. 2002...
  • Page 8 Antes de instalar este producto, lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 9 Statement 2 CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer.
  • Page 10 The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. viii IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 11 Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed the branch circuit protection requirements. Refer to the information that is provided with your IBM device for electrical specifications. Statement 14 CAUTION: Hazardous voltage, current, and energy levels might be present.
  • Page 12 Some accessory or option board outputs exceed Class 2 or limited power source limits and must be installed with appropriate interconnecting cabling in accordance with the national electric code. Statement 17 CAUTION: The following label indicates moving parts nearby. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 13: Chapter 1. Introduction

    Each caution and danger statement has an assigned number, which you can use to locate the corresponding statement in your native language. v User’s Guide This publication is provided in PDF on the IBM xSeries Documentation CD. It contains general information about your server. v Hardware Maintenance Manual and Troubleshooting Guide This publication is provided in PDF on the IBM xSeries Documentation CD.

  • Page 14: Major Components Of The Xseries 345 Type 8670 Server

    Major components of the xSeries 345 Type 8670 server The orange color on components and labels in your server identifies hot-swap or hot-plug components. You can install or remove hot-swap or hot-plug components while the system is running, provided that your system is configured to support this function.

  • Page 15: Component Locations

    Component locations This section provides illustrations of the system-board and PCI riser-card component locations. System-board option connectors The following illustration shows the location of the system-board connectors for user-installable options. DIMM 1 DIMM 4 (J1) (J4) DIMM 3 VRM 2 DIMM 2 (J3) (J5)

  • Page 16: System-Board Internal Cable Connectors

    Fans 3 and 7 (J27) USB 3 operator panel Power signal (J25) Fans 2 and 6 (J29) Fans 1 and 5 (J26) Power (J24) Internal SCSI IDE (J21) Operator panel (J23) (J22) IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 17: System-Board External Port Connectors

    System-board external port connectors The following illustration shows the location of the input/output external port connectors on the system board. Serial/video (J9) Mouse/keyboard (J10) Ethernet 1 (J11) Ethernet 2 (J12) RS485-A and B (J15) USB 1 (J17) USB 2 (J18) External SCSI (J19)

  • Page 18: System-Board Switches And Jumpers

    System-board switches and jumpers The following illustration shows the location of the switch block (SW2) and the flash boot jumper on the system board. System board switch block (SW2) Flash boot block recovery jumper (J34) IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 19 Changing the position of this switch does not affect the administrator password check if an administrator password is set. See the User’s Guide on the IBM xSeries Documentation CD for additional information about the power-on password. H8 out serial port. This switch is reserved for service use only.

  • Page 20: System-Board Led Locations

    VRM 2 error LED DIMM 4 error LED (CR16) (CR13) Microprocessor 2 error LED (CR17) Microprocessor 1 error LED (CR18) VRM 1 error LED (CR19) Integrated System Management Processor (ISMP) activity LED (CR41) IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 21: Chapter 2. Installing Options

    Back up all important data before you make changes to hard disk drives. v For a list of supported options for your server, go to http://www.ibm.com/pc/us/compat/ on the World Wide Web. v To maintain proper system cooling, do not operate the server for more than 10 minutes without either a drive or filler panel installed in each bay.

  • Page 22: Working Inside The Server With The Power On

    Do not place the device on your system unit cover or on a metal table. v Take additional care when handling devices during cold weather because heating reduces indoor humidity and increases static electricity. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 23: Server Power Features

    Server power features This section contains information about how to properly turn your server on and off. Turning on the server You can turn on the server in any of the following ways: v If the power cords are connected to a power source, you can press the power-control-button on the front of the server.

  • Page 24: Turning Off The Server

    2. Press the power-control button on the front of the server. You can put the server into Standby mode remotely by using the service processor. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 25: Removing The Cover And Bezel

    Removing the cover and bezel The following illustration shows how to remove the cover and bezel. Cover-release latch Bezel Complete the following steps to remove the server top cover: 1. Review the information in “Safety” on page v, and “Installation guidelines” on page 9.

  • Page 26: Working With Adapters

    PCI riser card PCI-X slot 3 64-bit 3.3V 133 MHz (PCI 3) PCI-X slot 4 64-bit 3.3V 133 MHz (PCI 4) PCI slot 5 32-bit 5V 33 MHz (PCI 5) System management connector IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 27: Adapter Considerations

    2-U bracket that comes with the controller is required to install the controller. v The optional IBM Remote Supervisor Adapter can be installed only in PCI slot 5. Use the ribbon cable that comes with the adapter to connect the adapter to the system management connector on the PCI riser-card.

  • Page 28: Installing An Adapter

    (see “Turning off the server” on page 12); then, remove the cover (see “Removing the cover and bezel” on page 13). 3. Determine which expansion slot you will use for the adapter. IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 29 4. If you are installing an adapter in PCI slot 3, 4, or 5, remove the PCI riser-card assembly. PCI riser-card assembly Retention latch a. Press on the retention latch to release the PCI riser-card assembly. b. Lift the assembly from the server. c.
  • Page 30 PCI adapter Adapter retainer 9. If you removed the PCI riser-card assembly to install the adapter, press the PCI riser-card assembly firmly into the connector so that the retention latch is engaged. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 31: Installing A Serveraid-5I Controller

    Note: Make sure that the PCI riser-card assembly is properly seated on the system-board connector and that the cables under the PCI riser-card assembly are not pinched. 10. Connect any needed cables to the adapter. See the documentation that comes with your adapter for cabling instructions.

  • Page 32: Installing A Hot-Swap Drive

    Ensure that the tray handle is open (that is, perpendicular to the drive). b. Align the drive assembly with the guide rails in the bay. c. Gently push the drive assembly into the bay until the drive stops. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 33: Installing Memory Modules

    Disabled in the Configuration/Setup Utility program Memory Settings menu. In this case, re-enable the memory row in the Configuration/Setup Utility program or reload the default memory settings. See the User’s Guide on the IBM xSeries Documentation CD for more information. Chapter 2. Installing options...
  • Page 34 If closed, open the retaining clips; then, insert the DIMM by pressing the DIMM straight into the connector. Be sure that the retaining clips snap into the closed position. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 35: Installing An Additional Microprocessor

    Microprocessor internal and external clock frequencies must be identical. Notes: 1. To order additional microprocessor options, contact your IBM reseller or IBM marketing representative. 2. When you install the microprocessor in socket J6, you must also install the voltage regulator module (VRM) that comes with the microprocessor in VRM connector J5.
  • Page 36 VRM 2 connector (J5) Microprocessor 2 (J6) Microprocessor 1 (J7) VRM 1 connector (J8) Note: For additional illustrations of the system-board components, see “System-board option connectors” on page 3. IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 37 The following illustration shows how to install the second microprocessor on the system board. Note: Do not remove the first microprocessor from the system board to install the second microprocessor. Captive screws Heat sink Microprocessor Microprocessor release lever Complete the following steps to install an additional microprocessor: 1.
  • Page 38 VRM. Insert the free end of the retainer clip on the other side of the connector. 6. Locate the second microprocessor socket (connector J6) on the system board. IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 39 7. Install the microprocessor: a. Pull out and lift up on the microprocessor-release lever to unlock the microprocessor socket. b. Touch the static-protective package containing the new microprocessor to any unpainted metal surface on the server; then, remove the microprocessor from the package. c.

  • Page 40: Installing A Hot-Swap Power-Supply Option

    There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Power supply Handle (open position) AC power LED (green) DC power Power supply blank LED (green) (some models) IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 41 Complete the following steps to install a power supply: 1. (Some models) Remove the power-supply blank from the empty power-supply bay by pinching the side clip and pulling the power-supply blank from the bay. Save the power-supply blank in case you remove the power supply at a later time.

  • Page 42: Replacing A Hot-Swap Fan

    Note: Install the optional fans from the power-supply option in slots 6, 7, and 8. 5. Push the replacement fan assembly into the server until it clicks into place. 6. Replace the cover. See “Installing the server cover and bezel” on page 33. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 43: Replacing The Battery

    Replacing the battery IBM has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you replace the battery, you must adhere to the following instructions. Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
  • Page 44 9. Reinstall the adapters that you removed, and reconnect the internal cables that you disconnected. 10. Connect all external cables and all power cords. 11. Reinstall the server cover (see “Installing the server cover and bezel” on page 33). IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 45: Completing The Installation

    12. Start the Configuration/Setup Utility program and set configuration parameters as needed. See the User’s Guide on the IBM xSeries Documentation CD for additional information about using the Configuration/Setup Utility program. Completing the installation To complete your installation, reinstall the bezel, reinstall the server cover, reconnect all cables that you disconnected earlier, and for certain options, run the Configuration/Setup Utility program.

  • Page 46: Connecting External Options

    SMP server. Therefore, you might need to upgrade your operating system to support SMP. See the User’s Guide on the IBM xSeries Documentation CD and your operating-system documentation for additional information.

  • Page 47: Installing The Server In A Rack

    The following illustrations show the locations of the input and output connectors on your server. Rear view Mouse Universal Serial Bus (USB) 1 and 2 Serial Video Keyboard RS 485-A Ethernet 1 SCSI (ISMP) RS 485-B Ethernet 2 (ISMP) Front view USB 3 Installing the server in a rack Detailed cabling instructions for a typical rack server configuration are in the Rack...
  • Page 48 IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 49: Chapter 3. Input/Output Ports

    The following illustration shows the I/O port connectors on the front and rear of your server. Rear view Mouse Universal Serial Bus (USB) 1 and 2 Serial Video Keyboard RS 485-A Ethernet 1 SCSI (ISMP) RS 485-B Ethernet 2 (ISMP) Front view USB 3 © Copyright IBM Corp. 2002...

  • Page 50: Video Port

    The system board has one auxiliary-device port that supports a mouse or other pointing device. The following illustration shows the auxiliary-device connector on the rear of your server. This connector conforms to the industry standard for a PS/2 pointing device. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 51: Ultra320 Scsi Controller System-Board Connectors

    If you plan to attach external SCSI devices, you must order additional cables. To select and order the correct cables for use with external devices, contact your IBM reseller or IBM marketing representitive.

  • Page 52: Scsi Connectors

    5. Select Save Settings; then, select Exit Setup to exit from the Configuration/Setup Utility main menu. Serial-port connector The following illustration shows the 9-pin, male D-shell serial-port connector on the rear of your server. This connector conforms to the industry standard. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 53: Universal Serial Bus Version 1.1 Ports

    Universal Serial Bus version 1.1 ports Your server has one Universal Serial Bus (USB) version 1.1 connector on the front of the server and two USB version 1.1 connectors on the rear of the server. USB is a serial interface standard for telephony and multimedia devices. It uses Plug and Play technology to determine the type of device that is attached to the connector.

  • Page 54: Ethernet Connectors

    The RS-485 connectors are used for the ISMP interconnect function. The ISMP interconnect function uses these connectors to daisy-chain several system service processors together. This function enables the service processors to communicate with each other in half-duplex mode. IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 55: Appendix. Notices

    Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

  • Page 56: Trademarks

    OS/2 WARP Predictive Failure Analysis Lotus and Domino are trademarks of Lotus Development Corporation and/or IBM Corporation in the United States, other countries, or both. Intel, Celeron, MMX, LANDesk, Pentium, Pentium II Xeon, Pentium III Xeon, and Xeon are trademarks of Intel Corporation in the United States, other countries, or both.

  • Page 57: Electronic Emission Notices

    Unless otherwise stated, IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM. Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

  • Page 58: Industry Canada Class A Emission Compliance Statement

    IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the product, including the fitting of non-IBM option cards. This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022.

  • Page 59: Japanese Voluntary Control Council For Interference (Vcci) Statement

    Japanese Voluntary Control Council for Interference (VCCI) statement Power cords For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
  • Page 60 Islands, Colombia, Costa Rica, Dominican Republic, Ecuador, El Salvador, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Korea (South), Liberia, Mexico, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, Saudi Arabia, Suriname, Taiwan, Trinidad (West Indies), United States of America, Venezuela IBM xSeries 345 Type 8670: Option Installation Guide...

  • Page 61: Index

    3 hot-swap power supply 28 port 5 memory module 21 SCSI 39 microprocessor 23 system board 3 non-hot-plug adapter 16 system-board switch block 6 options 9 Universal Serial Bus 41 RAID adapter 19 VRM 3 © Copyright IBM Corp. 2002...
  • Page 62 9 Ethernet 42 system-board pointing device port 38 connectors port external port 5 Advanced System Management 42 internal cable 4 auxiliary-device 38 SCSI 4, 39 connectors 5 input/output 37 IBM xSeries 345 Type 8670: Option Installation Guide...
  • Page 63 thermal material video port 38 heat sink 27 voltage regulator module trademarks 44 installing 26 turning off the server 12 VRM See voltage regulator module 26 turning on the server 11 Web site United States electronic emission Class A notice 45 compatible options 9 United States FCC Class A notice 45 SCSI standards 39...
  • Page 65 Part Number: 48P9719 Printed in the United States of America. 48P9719...

Table of Contents