Getting To Know The Router; Front Panel - NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual

4 Getting to know the router

This section will introduce the hardware of the router.

4.1 Front Panel

The front panel contains LEDs which show the status of the SHDSL router. Note: The front panel LEDs of the
NB712 (2-wire) and NB714 (2 or 4-wire selectable) are identical. The NB714 is shown below.
LED status
LEDs
PWR
WAN
LNK
ACT
LAN
1
2
3
4
ALM
14
Active Description
On Power on
On SHDSL line connection is established
Blink SHDSL handshake
On Transmit or received data over SHDSL link
On Ethernet cable is connected to LAN 1
Blink Transmit or received data over LAN 1
On Ethernet cable is connected to LAN 2
Blink Transmit or received data over LAN 2
On Ethernet cable is connected to LAN 3
Blink Transmit or received data over LAN 3
On Ethernet cable is connected to LAN 4
Blink Transmit or received data over LAN 4
On SHDSL line connection is dropped
Blink SHDSL self test
NB712 / NB714 User Guide
YML829 Rev1