NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual page 109

14.16.16 IPQoS
IP QoS is a function to decide the priorities of setting IPs to transfer packets under the situation of overloading
bandwidth.
To configure IP QoS function, move the cursor to IPQoS and press enter.
>> Active
Add
Delete
Modify
list
You can enable the IPQoS function via active command.
The add parameters of IPQoS can be configured via add command
>> Protocol
local_ip
remote_ip
Port
description Policy description
Enable
Precedence
The port type is configured by protocol command.
The local ip range is configured by local_ip command.
The remote ip range is configured by remote_ip command.
The port range is configured by port command.
To define the description of policy is configured by description command.
To enable the policy is configured by enable command.
To define the priority of the policy is configured by precedence command
To delete the policy is configured by delete command.
To modify the policy is configured by modify command.
You can view the IPQoS configuration via list command.
NB712 / NB714 User Guide
YML829 Rev1
Trigger IP QoS function
Add IP QoS policy
Delete IP QoS policy
Modify IP QoS policy
Show IP QoS policy table
Configure protocol
Configure local IP parameter
Configure remote IP parameter
Configure port parameter
Enable the policy
Configure precedence parameter
109