Configuration Via Serial Console Or Telnet With Menu Driven Interface; Serial Console; Telnet - NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual

14 Configuration via Serial Console or Telnet with Menu Driven
Interface

14.1 Serial Console

Check the connectivity of the RS-232 cable from your computer to the serial port of ROUTER. Start your terminal
access program with VT100 terminal emulation. Configure the serial link with the following value:
Parameter
Baudrate
Data Bits
Parity Check
Stop Bits
Flow-control
Press the SPACE key until the login screen appears. When you see the login screen, you can logon to Router.
Note: You have to use the SPACE key. Pressing other keys will not work.
User:
Password:
Note: The factory default user and passwords are both "admin".

14.2 Telnet

Make sure the correct Ethernet cable is used to connect the LAN port of your computer to the Router. The LAN
LNK indicator on the front panel will glow if the correct cable is used. Start your Telnet client with a VT100
terminal emulation and connect to the management IP of Router. When the login screen appears enter your User
name and Password.
User:
Password:
Note: The default IP address is 192.168.1.1.
80
Value
9600
8
No
1
No
admin
*****
admin
*****
NB712 / NB714 User Guide
YML829 Rev1