14.13.1 User Profile
You can use the user command to clear, modify and list the user profiles. You can define up to five users to access
the router via console port or telnet in user profile table however users who have the supervisor password can
change the configuration of the router. Move the cursor " >> " to user and press enter key.
>> clear
modify
list
You can delete the user by number using the clear command. Make sure the number of the user is correct. You
can use list command to check it. Modify command is to modify any user information or add a new user to user
profile.
To modify or add a new user, move the cursor to modify and press enter.
----------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow.
>> Attrib
Profile
There are two UI mode, command and menu mode, to setup the product. We will not discuss command mode in
this manual.
14.13.2 Security
Security command can be configured sixteen legal IP address for telnet access and telnet port number.
Move the cursor " >> " to security and press enter. The default legal address is 0.0.0.0 which means that there is
no IP restriction to access the router via telnet.
>> port
ip_pool
list
90
Clear user profile
Modify the user profile
List the user profile
UI mode
User name and password
Configure telent TCP port
Legal address IP address pool
Show security profile
NB712 / NB714 User Guide
YML829 Rev1
Need help?
Do you have a question about the G.SHDSL 4-port Security Modem Routers NB712 and is the answer not in the manual?
Questions and answers