Wan - NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual

8.2 WAN

The SHDSL router supports up to 8 PVCs. WAN 1 was configured via BASIC except QoS. If you want to setup
other PVCs, 2 to 8, the parameters are setup in WAN. I.e., you must apply two or more Internet Services with ISPs
otherwise you do not need to setup WAN.
The WAN Number 1 will be the parameters setup in Basic Setup. If you want to setup another PVC, you can
configure them in WAN 2 to WAN 8.
Enter the parameters.
If the WAN protocol is PPPoA or PPPoE with dynamic IP, leave the default WAN IP address and Subnet Mask as
default settings. The system will ignore the IP address and Subnet mask information but deleting or leaving blank
the items will cause system error.
NB712 / NB714 User Guide 37
YML829 Rev1