If you did not see the Version mismatch, upgrade needed in the command's output, see
"Troubleshooting an Express Query Manual Intervention Failure (MIF)" (page
Perform the following steps only if you see the Version mismatch, upgrade needed in the
command's output:
1.
Disable auditing by entering the following command:
ibrix_fs -A -f <FSNAME> -oa audit_mode=off
In this instance <FSNAME> is the file system.
2.
Disable Express Query by entering the following command:
ibrix_fs -T -D -f <FSNAME>
In this instance <FSNAME> is the file system.
3.
Delete the internal database files for this file system by entering the following command:
rm -rf <FS_MOUNTPOINT>/.archiving/database
In this instance <FS_MOUNTPOINT> is the file system mount point.
4.
Clear the MIF condition by running the following command:
ibrix_archiving -C <FSNAME>
In this instance <FSNAME> is the file system.
5.
Re-enable Express Query on the file systems:
ibrix_fs -T -E -f <FSNAME>
In this instance <FSNAME> is the file system.
Express Query will begin resynchronizing (repopulating) a new database for this file system.
6.
Re-enable auditing if you had it running before (the default).
ibrix_fs -A -f <FSNAME> -oa audit_mode=on
In this instance <FSNAME> is the file system.
7.
Restore your audit log data:
MDImport -f <FSNAME> -n /tmp/auditData.csv -t audit
In this instance <FSNAME> is the file system.
8.
Restore your custom metadata:
MDImport -f <FSNAME> -n /tmp/custAttributes.csv -t custom
In this instance <FSNAME> is the file system.
24
Upgrading the StoreAll software to the 6.3 release
152).