HP StoreAll 9730 Administrator's Manual page 160

Storage configuration
Networking on the blade
7. On the Join a Cluster – Step 2 dialog box, enter the requested information.
NOTE:
the IP you are registering for this blade.
8. The Network Configuration dialog box lists the interfaces configured on the system. If the
information is correct, select Continue and go to the next step.
If the information specified for a bond is incorrect, select the bond and then select Configure
to customize the interface. On the Select Interface Type dialog box, select Bonded Interface.
On the Edit Bonded Interface dialog box, enter the IP address and netmask, specify any bond
options, and change the slave devices as necessary for your configuration.
160 Recovering the X9720/9730 Storage
On the dialog box, Register IP is the Fusion Manager (management console) IP, not