A Cascading Upgrades; Upgrading The Storeall Software To The 6.1 Release - HP StoreAll 9730 Administrator's Manual

A Cascading Upgrades

If you are running a StoreAll version earlier than 5.6, do incremental upgrades as described in
the following table. If you are running StoreAll 5.6, upgrade to 6.1 before upgrading to 6.3.
If you are upgrading from
StoreAll version 5.4
StoreAll version 5.5
StoreAll version 5.6
Common issue across all upgrades from StoreAll 5.x
If you are upgrading from a StoreAll 5.x release, ensure that the NFS exports option
subtree_check is the default export option for every NFS export. The no_subtree_check
option is not compatible with the StoreAll OS software.
To add the subtree_check option, perform the following steps:
1. Unexport the NFS exports:
ibrix_exportfs -h <HOSTLIST> -p <CLIENT1:PATHNAME1>
2. Create NFS exports with the subtree_check option:
ibrix_exportfs –f <FSNAME> -p <CLIENT1:PATHNAME1> -o "subtree_check"
NOTE:
option by a comma (for example, -o rw,subtree_check).
3. Complete steps 1 and 2 for every NFS export.
4. Verify that all NFS exports have the subtree_check option set:
ibrix_exportfs –l

Upgrading the StoreAll software to the 6.1 release

This section describes how to upgrade to the latest StoreAll software release. The Fusion Manager
and all file serving nodes must be upgraded to the new release at the same time.
Upgrades to the StoreAll software 6.1 release are supported for systems currently running StoreAll
software 5.6.x and 6.x.
If your system is currently running StoreAll software 5.4.x, first upgrade to 5.5.x, then upgrade to
5.6.x, and then upgrade to 6.1. See
(page 188).
If your system is currently running StoreAll software 5.5.x, upgrade to 5.6.x and then upgrade to
6.1. See "Upgrading the StoreAll software to the 5.6 release" (page
IMPORTANT:
Ensure that the NFS exports option subtree_check is the default export option for every
NFS export. See
information.
Any support tickets collected with the ibrix_supportticket command will be deleted
during the upgrade. Before upgrading to 6.1.4, download a copy of the archive files (.tgz)
from the /admin/platform/diag/supporttickets directory.
174 Cascading Upgrades
Upgrade to
StoreAll version 5.5
StoreAll version 5.6
StoreAll version 6.1
Multiple options can be specified by using the –o parameter by separating each
If you are upgrading from a StoreAll 5.x release:
"Common issue across all upgrades from StoreAll 5.x" (page 174)
"Upgrading the StoreAll software to the 5.5 release"
Where to find additional information
"Upgrading the StoreAll software to the
5.5 release" (page 188)
"Upgrading the StoreAll software to the
5.6 release" (page 185)
"Upgrading the StoreAll software to the
6.1 release" (page 174)
185).
for more