To Install:
1. Attach the camshaft position (CMP) sensor to the engine. Torque the bolt to 21 ft-
lb (29 Nm).
2. Connect the camshaft position (CMP) sensor connector.
3. Install the intake manifold onto the engine.
5.3L & 6.0L Engines
2005-2007
To Remove:
1. Remove the generator bracket assembly from the engine.
2. Disconnect the engine harness from the camshaft position sensor jumper harness.
3. Detach the camshaft position sensor assembly from the engine.
4. Remove the o-ring from the camshaft position sensor.
5. Disconnect the camshaft position sensor from the camshaft position sensor jumper
harness.
Camshaft position sensor removal and installation