Parking brake frame retainer
12. Detach the parking brake cable retainers from the frame.
13. Remove the parking brake from the mounting bracket.
14. Remove the parking brake cables from the parking brake actuators.
15. Remove the parking brake cables from the vehicle.
To Install:
1. Route the parking brake cable through the vehicle.
2. Attach the parking brake cables to the underbody mounting studs. Torque the nuts
to 7 ft-lb (10 Nm).
3. Lift the fuel tank.
4. Install the rear support bracket onto the fuel tank.
5. Remove the pole jack supporting the fuel tank.
6. Install the parking brake cables onto the parking brake actuators.
7. Install the parking brake cables into the frame retainers.