Air Door Actuators
Removal & Installation
Console Mode
To Remove:
1. Remove the center console from the vehicle.
2. Detach the air outlet duct from the center console.
3. Disconnect the console mode actuator connector.
4. Detach the console mode actuator from the center console.
To Install:
1. Attach the console mode actuator to the center console. Torque the screws to 17
in-lb (1.9 Nm).
2. Connect the console mode actuator connector.
3. Attach the air outlet duct to the center console. Torque the screw to 17 in-lb (1.9
Nm).
4. Install the center console into the vehicle.