20. Detach the lower ground terminals from the engine.
21. Remove the starter from the engine.
22. Detach the battery cable channel from the oil pan.
23. Disconnect the A/C compressor connector.
24. Lower the vehicle.
25. Move the engine harness to the side.
26. Remove the generator from the engine.
27. Use a set of J 38185 hose clamp pliers to remove the inlet and outlet hoses from
the water outlet.
28. Disconnect the auxiliary heater inlet and outlet hose/pipe assembly from the heater
water shutoff valve pipes.
29. Use a set of J38185 hose clamp pliers to remove the auxiliary heater inlet and
outlet hoses/pipes from the water pump.
Lift bracket removal and installation