Clearance Lamp: Removal & Installation - Chevrolet Trailblazer Service Manual

Clearance Lamp
Removal & Installation
To Remove:
1. Turn the headlamp switch to the off position.
2. Remove the push pin from the clearance lamp.
3. Use a flat bladed tool to pry up the rear of the clearance lamp lens.
4. Remove the clearance lamp lens from the lamp by pulling the lens rearward.
5. Remove the bulb from the cornering lamp.
To Install:
1. Install the bulb into the cornering lamp.
2. Place the forward edge of the lens in the opening in the lamp and push down on
the rear of the lens.
3. Install the push pin into the clearance lamp.
Clearance lamp removal and installation