Stabilizer Link Removal And Installation - Chevrolet Trailblazer Service Manual

To Install:
1. Install the shock absorber into the vehicle.
2. Install the lower mounting bolt into the shock absorber. Torque the bolt to 63 ft-lb
(85 Nm).
3. Install the upper mounting bolt into the shock absorber. Torque the bolt to 63 ft-lb
(85 Nm).
4. Remove the support from the rear axle.
5. Lower the vehicle.
Stabilizer Shaft
Removal & Installation
To Remove:
1. Lift the vehicle.
2. Remove wheels from the vehicle.
3. Detach the stabilizer shaft links from the stabilizer shaft.

Stabilizer link removal and installation