Master Cylinder Reservoir - Chevrolet Trailblazer Service Manual

5. Remove the master cylinder reservoir from the brake master cylinder assembly.
6. Remove and discard the master cylinder reservoir seals from the brake master
cylinder assembly.
7. Use denatured alcohol to clean the brake master cylinder assembly.
8. Use non-lubricated, filtered air to dry the brake master cylinder assembly.
To Install:
1. Use DOT-3 brake fluid to lubricate the new master cylinder reservoir seals.
2. Install the master cylinder reservoir seals onto the brake master cylinder assembly.
3. Install the master cylinder reservoir onto the brake master cylinder assembly.
4. Install the master cylinder reservoir retaining pins into the brake master cylinder
assembly.
5. Remove the master cylinder assembly from the vise.
6. Install the brake master cylinder assembly to the power vacuum brake booster.

Master cylinder reservoir