Chevrolet Trailblazer Service Manual page 137

To Install:
1. Attach the condenser onto the radiator. Torque the bolts to 21 ft-lb (28 Nm).
2. Install the radiator into the vehicle.
3. Lift the vehicle.
4. Use a set of J 38185 hose clamp pliers to connect the outlet radiator hose to the
radiator.
5. Use a set of J 38185 hose clamp pliers to connect the inlet radiator hose to the
radiator.
6. Attach the transmission cooler lines to the radiator.
7. If equipped, install the lower radiator support shield onto the radiator.
8. Lower the vehicle.
9. Install the cooling fan onto the engine.
10. Connect the coolant recovery line to the radiator.
11. Install the radiator support diagonal brace onto the vehicle.
12. Refill the radiator with coolant.